Sony » VGN-CR (Silver) » VGNCR490EBP

Sony » VGN-CR (Silver) » VGNCR490EBP LCD Screen Replacement Guide

How to Remove Replace Install your Sony VGN-CR (Silver) VGNCR490EBP Laptop LCD Screen

1. Remove the rubber covers from you Sony VGNCR490EBP LCD Screen.

2. Use a philips head screw driver to remove the screws.

3. Pry off the Sony VGNCR490EBP Plastic LCD bezel.

4. Remove the screws from the side of the LCD hinges.

5. Handle the Sony VGNCR490EBP LCD hinges with care as they are delicate.

6. Place the Sony VGNCR490EBP LCD Screen down on its front and remove the LCD ribbon cable from the LCD.

7. Unplug and remove the Sony VGNCR490EBP Inverter from the LCD.

8. You are now ready to replace and install your new Sony VGNCR490EBP LCD Screen.

9. Recconnect back your Sony VGNCR490EBP Inverter LCD Cable and Hinges.

10. Place the screws back in and secure the Plastic LCD Bezel back in place.